Three Way PVC Pneumatic Ball Valve

• Media: Water
• Material: Stainless Steel
• Connection Form: Flange
• Driving Mode: Pneumatic
• Nominal Pressure: 0.2~2.5MPa
• Channel: Tee Type
• Model NO.: Q41F
• Structure: Floating Ball Valve
• Type: Floating Ball Valve
• Temperature: Normal Temperature
• Standard: Standard
• Application: Industrial Usage, Water Industrial Usage, Household Usage, Ball Valve
• Ball Valve: Valve
• Solenoid Engine: PVC
• Stainless Steel: Stainless Steel Pump
• Pneumatic Valve: Pneumatic
• Transport Package: Box, Wooden Case
• Specification: 2"~48"
• Trademark: Borra
• Origin: China
• HS Code: 8481804090
• Production Capacity: 1000

Product Description

three-way PVC pneumatic ball valve :

The pneumatic ball valve is a ball valve equipped with a pneumatic actuator. The execution speed of the pneumatic actuator is relatively fast. The fastest switching speed is 0.05 seconds/time, so it is usually called a pneumatic quick-cut ball valve. Pneumatic ball valves are usually equipped with various accessories, such as solenoid valves, air source treatment triples, limit switches, positioners, control boxes, etc., to achieve local control and remote centralized control. The valve can be controlled in the control room. , There is no need to go to the scene or high altitude and dangerously bring manual control, which saves human resources as well as time and safety to a large extent
Design Features : 

1- Side Entry / Top Entry
2- Blow out proof Stem design
3- Anti-static feature
4- Fire safe design
5- Soft & Metal to Metal seats
6- Single-piece, Two-piece & Three-piece design
7- Manual, Gearbox, Actuator operation.
8- Valve could be supplied with ISO5211 Flange for operator installation.
9- Material: NACE MR-0175

Advantage Features :

1- The valve body casting adopts imported advanced technology, with reasonable structure and a beautiful appearance.

2- The valve seat adopts an elastic sealing structure, which is reliable in sealing and easy to open and close. 3- The valve stem adopts a bottom-mounted structure with an inverted seal, and the valve stem will not be rushed out when the valve cavity is abnormally increased in pressure.

4- A 90-degree switch positioning mechanism can be set, and locks can be added as needed to prevent misoperation.
5- Internal thread connection ball valve and butt-welding connection ball valve are used for PN1.0-4.0MPa, working temperature -29-180 degrees (sealing ring is reinforced polytetrafluoroethylene)

 
Use and Maintenance:

1- This manual is applicable to electric (or pneumatic) ball valves at the flange connection end.
2- It is composed of an electric (or pneumatic) actuator and a ball valve body part, and its connection depends on the bracket and the connecting shaft.
3- Use restrictions
A) Temperature and pressure limitation.
B) The nameplate shows the maximum allowable operating pressure of the ball valve at the maximum and minimum operating temperatures.
C) Valve seats and seals made of PTFE or RTFE are used, and the operating temperature should be between 150°C and 200°C. The operating temperature of other types of valve seats and seals should be checked.
D) The nominal pressure rating (PN) of the cryogenic valve can indicate the maximum working pressure of the valve under normal temperature conditions. (For example, PN4.0, indicating that the maximum working pressure when the operating temperature is between -290C and 380C is 40 Bar (4.0MPa)).
E) For the precautions of electric or pneumatic actuators, please refer to their corresponding instructions.

Installation:

1- Remove the protective covers on both sides of the flange, and rinse and clean with the valve fully opened.
2- The whole machine should be tested according to the specified signal (electrical or pneumatic) before installation (to prevent vibration from affecting the performance due to transportation), and then it can be installed online (wiring according to the electric actuator circuit diagram).
3- Before preparing to connect with the pipeline, flush and remove the remaining impurities in the pipeline (these substances may damage the valve seat and ball).
4- During installation, please do not use the actuator part of the valve as a lifting point to avoid damage to the actuator and accessories.
5- This type of valve should be installed in the horizontal or vertical direction of the pipeline.
6- The pipeline near the installation point should not hang down or bear external forces. Pipe supports or supports can be used to eliminate the deviation of the pipeline.
7- After connecting with the pipeline, please tighten the flange connecting bolts crosswise with the specified torque.

Our Specialization : 

 TIP Valve company specialized in manufacturing valves in many special materials Titanium Alloy, Nickel Alloy, Zirconium, Nickel Alloy, Aluminum-Bronze, Duplex to alloy 20#, 904L, 310S, 321, 
347 or other anti-corrosive alloys. 
Standard or Nonstandard: Standard
Structure: Ball
Pressure: Medium Pressure
Power: Manual
Material: Stainless Steel
The temperature of Media: Normal Temperature
Media: Oil, Gas, Water
Port Size: 2"~48"
Place of Origin: Zhejiang, China (Mainland)
Model Number: Q41F
Brand Name: BORRA
Application: General
Description: three-way PVC pneumatic Wenzhou ball valve
Product: Ball Valve
Color: As customer request
Seat: Hard seat or soft seat
Connection: SW RF RTJ LUG WAFER
Market: Offshore Subsea Petrochemical Chemical LNG Mining Desalination

Design Standard:

Valve Design	ANSI,ASME,API ,DIN, JIS,BS, GB
End Connection	Flange, Buttweld, Socket Weld
Testing	API 6D, API 598

 

Packaging & Delivery Packaging Details: We choose suitable wood cases according to different valves and arrange skilled workers to pack in case of bruise for ball valve

Delivery Detail:30 days

Borra Technology Co., Ltd.

Borra Technology co., Ltd., founded in 1995, owns a top-rank design, production, sales, and service team, and modern production lines, to manufacture various self-priming pumps, movable diesel pumps, diesel Self-Priming dirt drain pumps, diesel fire pumps units, diesel mini-pumps.


Certificate :


Services:

1. One year or 1000 working hours guarantee of the whole machine except for wear parts;
2. Technical support by email the whole day;
3. Calling service;
4. User's manual available;
5. Installation guide for clients from both China and abroad;
6. Maintenance and replacement service;

FAQ:

Q1: Are you a reliable company?
A1: Bora is located in Wenzu, a beautiful city in Zhejiang Province, China. we have many years of manufacturing experience,
we can supply all types of fire protection solutions, Drainage and sewage solution, and other pump products.
We have an independent factory and trade office.

Q2: how to deliver the portable diesel water pump
A2: We can offer our equipment by containers or bulk ship.

Q3: How to pay for the portable Diesel water pump?
A3: We can accept T/T, L/C and soon

Q4: why choose borra company?
A4: We have an independent factory and foreign trade office. so we can design high-quality portable generators
and water pumps according to clients requirements and our price is reasonable. 

Contact Us
If you are interested in our products or have any questions about our products, we are very honored to serve you.