• Movable Diesel Sewage Pump with Trailer
  • Movable Diesel Sewage Pump with Trailer
  • Movable Diesel Sewage Pump with Trailer
  • Movable Diesel Sewage Pump with Trailer
  • Movable Diesel Sewage Pump with Trailer
  • Movable Diesel Sewage Pump with Trailer

Movable Diesel Sewage Pump with Trailer

After-sales Service: Worldwide
Warranty: 1 Year
Type: Self-priming Pump With Inner Recirculation
Air Engine Type: Diesel Engine
Theory: Gas-hydraulic Hybrid Type
Transmission: Direct Connection Transmission
Customization:

Contact Supplier

Gold Member Since 2021

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
SCP
Structure
The Slide
Silenced Diesel Engine Pump
Silenced Diesel Water Pump
Silenced Movable Diesel Pump
Silenced Diesel Pump
Silenced Movable Diesel Water Pump
Silenced Movable Diesel Engine Pump
Silenced Movable Diesel Engine Water Pum
Silenced Diesel Engine Water Pump
Transport Package
Wood Case
Specification
SGS
Trademark
Borra
Origin
Wenzhou
HS Code
841330900
Production Capacity
500

Product Description

SCP self-priming diesel engine pump:
Characteristics: SCP series of self-priming diesel engine pumps are an ideal dirty water treatment pump for solid particles. The impeller can let solid particles with diameters below 76mm pass. It is easy to use on the ground, finish the installation and daily maintenance.
 
Movable Diesel Sewage Pump with Trailer
Applicable occasions:

areas without power supply; surprise flood prevention and drainage; dirt drain projects, architecture, paper-making, textile, foods, chemicals, electric power distribution, mining, sewage drain, leather, brewage, non-corrosive, and highly-polluted sewage drain.drought relief; agricultural irrigation and aquaculture; various temporary pumping occasions; cofferdam pumping industry, municipal drainage.

1. Preparation before equipment operation
2. Prepare sufficient diesel engine oil, diesel oil, anti-cold fluid (water can also be added depending on the ambient temperature);
3. Prepare the water inlet pipe with flange (suction pipe: steel wire rubber pipe) less than 10 meters, and it can also be equipped with a quick connector to connect the water pump inlet and the water inlet pipe;
4. Prepare the outlet pipe (blue hose, fire hose, or rubber hose);

Movable Diesel Sewage Pump with Trailer

Characteristics: 

SCP series of self-priming diesel engine pumps are an ideal dirty water treatment pump for solid particles. The impeller can let solid particles with diameters below 76mm pass. It is easy to use on the ground, finishes the installation and daily maintenance.


Conditions, temperature:

0ºC~40 ºC, density≤1.2×10 3 kg/m3, pH: 5~9; solid particle proportion ≤2%;·maximum particle diameter: SCP-3 63mm; SCP-4/SP-6 76mm; ambient temperature:≤40 ºC;·altitude: maximum 1000m.

Technical parameters:
 
RPM
Q H        
m3/h L/s m kW HP mm mm m
SCP-2 1150 15 4.2 4.0 1.1 1.5 50(2') 38 5.0
1450* 20 5.6 6.5 1.5 2 6.5
1750 25 6.9 9.5 3 4 6.5
2050 28 7.8 13.5 4.0 5.5 6.5
2350 32 8.9 18.0 7.5 10 6.5
2650 35 9.7 23.0 7.5 10 6.5
2900* 40 11.1 27.0 9.2 12.5 6.5
SCP-3 650 25 6.9 2 0.75 1 80(3') 63 1.5
750* 30 8.3 3 1.5 2 1.8
850 32.5 9.0 4 1.5 2 2.4
950* 40 11.1 4.5 1.5 2 3.0
1050 42.5 11.8 5.5 3 4 4.0
1150 45 12.5 7 4 5.5 4.9
1250 50 13.9 8 4 5.5 5.5
1350 52.5 14.6 10 5.5 7.5 5.8
1450* 55 15.3 11.5 5.5 7.5 6.4
1550 60 16.7 12.5 7.5 10 6.4
1650 65 18.1 14.5 11 15 6.7
1750 70 19.4 16 11 15 6.7
1850 72.5 20.1 18 15 20 7.6
1950 75 20.8 20 15 20 7.6
2050 80 22.2 22.5 18.5 25 7.6
2150 85 23.6 24.5 18.5 25 7.6
SCP-4 650 40 11.1 3 1.5 2 100(4') 76 1.5
750* 45 12.5 4 1.5 2 2.4
850 53 14.7 5 2.2 3 4.9
950* 60 16.7 6 3 4 5.8
1050 65 18.1 7.5 5.5 7.5 6.7
1150 72 20 9 5.5 7.5 7.3
1250 80 22.2 10.5 7.5 10 7.6
1350 85 23.6 12.5 11 15 7.6
1450* 100 27.8 13.5 11 15 7.6
1550 110 30.6 15.5 15 20 7.6
1650 115 31.9 18 18.5 25 7.6
1750 120 33.3 20 22 30 7.6
1850 130 36.1 22.5 30 40 7.6
1950 135 37.5 25 30 40 7.6
SCP-6 650 100 27.8 3.5 3 4 150(6') 76 2.4
750* 125 34.7 4.5 4 5.5 2.7
850 150 41.7 5.5 7.5 10 3.6
950* 160 44.4 7.5 7.5 10 4.2
1050 180 50 9 11 15 5.5
1150 200 55.6 10 15 20 6.4
1250 220 61.1 12.5 22 30 6.4
1350 230 63.9 15 30 40 6.7
1450* 250 69.4 17 30 40 7.0
1550 280 77.8 18 37 50 7.6
SCP-8 650 200 55.6 6 7.5 10 200(8') 76 2.7
750* 230 63.9 8 11 15 3.7
850 260 72.2 10 15 20 4.6
950* 300 83.3 12 22 30 5.2
1050 320 88.9 15 30 41 6.1
1150 350 97.2 18 37 50 6.4
1250 400 111.1 20 55 75 6.7
1350 450 125.0 23 75 102 7
1450* 500 138.9 26 75 102 7
SCP-10 650 250 69 6.5 11 15 250(10') 76 2.1
750* 300 83 8.5 15 20 3.4
850 350 97 11 22 30 4.3
950* 400 111 13 30 41 5.2
1050 450 125 16 45 61 5.5
1150 500 139 19 55 75 5.5
1250 525 146 23 75 102 5.8
1350 550 153 27 90 122 6.7
1450* 600 167 31 90 122 6.7

Start, running and stop 

Start

1. First of all, pour water into pipes, to make the pump and inlet pipe filled with waterThe pipes shall be sealed, no air leaked. (no-water inside start is forbidden) 
2. Close globe valve and cock on outlet pipe, to reduce start currency.
3. Rotate the rotor by hand, lubricate the bearing and check the pump impeller, seal the ring, if it cannot rotate, you shall not start.
4. Try to start, motor rotation direction shall be as same as the arrow direction on the pump. 
5. When the rotor works normally, open gradually the outlet globe valve, adjust for the work conditions required.


Running

1. Observe the reading in meters, keep it running around the flow and head shown on the nameplate.
2. Regularly check, motor currency value shall not exceed rated currency value.
3. Pump bearing temperature shall not exceed 75ºC, and shall not be 35ºC higher than ambient environment.
4. To start, loosen the stuff cap. Adjust later when started.
5. In case of fragile component abrasion, replace in time.
6. When any abnormal happens, immediately stop and check.


Stop

1. Close the globe valve on the outlet pipe, close the vacuum gauge cock.
2. Stop the motor, and close the pressure cock.
3. In Winter, drain the liquid in the pump completely to avoid frozen cracks.
4. When you will not use it for a long time, uninstall the pump, clean, and lubricate.


Movable Diesel Sewage Pump with Trailer
Troubleshooting 
 
Fault Cause Solution
The pump cannot suck water, pressure gauge & vacuum gauge vibrating  1. Insufficient water pouring 
2. Leak between pipe and meter 
3. Suction is too high 
1, check a leak in the bottom valve. 
2, Tighten the leaked part 
3, reduce suction 
The pump cannot suck, high vacuum is shown in the vacuum gauge 1, bottom valve closed or jammed 
2, Too great water suction resistance 
3, filter jammed 
1, check bottom valve
2, replace water suction pipe
3, clear off the filter
Pressure gauge works, no water outcome 1. Great outlet water pipe resistance
2. Wrong rotation direction 
3. Outlet pipe valve closed
4. impeller jammed 
1. check or shorten water pipe 
2, check the motor, adjust 
3, open the valve and clear off the impeller
Cannot reach designed flow 1. air sucked 
2. Water level drops, submerged depth is not enough 
3. impeller jammed 
4. rotor torn and worn 
1, check leak part and clear off 
2, prolong water inlet pipe, increase the submerged depth
3, uninstall and clear off 
4, replace seal ring 
Great pump power consumption 1. Stuff tightened, overheated 
2. Great flow 
3. Collision between rotor and case 
4. Pump shaft bearing abrasion 
5. Pump shaft misplaced
1. loosen slightly
2. reduce globe valve opening
3. adjust 
4. replace bearing 
5. replace or adjust 
Great pump vibration  1. impeller partially jammed 
2. impeller damaged 
3. little flow 
4. non-concentric between pump shaft and motor.
5, bearing damaged 
6, gas etching
1. Uninstall and clear off 
2, replace 
3, increase opening 
4, adjust
5, replace  
6, change suction inlet position 

Borra Technology Co., Ltd.

Borra Technology co., Ltd., founded in 1995, owns a top-rank design, production, sales, and service team, and modern production lines, to manufacture various self-priming pumps, movable diesel pumps, diesel Self-Priming dirt drain pumps, diesel fire pumps units, diesel mini-pumps .
Movable Diesel Sewage Pump with Trailer
Certificate :
Movable Diesel Sewage Pump with Trailer


Services:

1. One year or 1000 working hours guarantee of the whole machine except for wear parts;
2. Technical support by email the whole day;
3. Calling service;
4. User's manual available;
5. Installation guide for clients from both China and abroad;
6. Maintenance and replacement service;

FAQ:


Q1: Are you a reliable company?
A1: Bora is located in Wenzu, a beautiful city in Zhejiang Province, China. we have many years of manufacturing experience,
we can supply all types of fire protection solutions, Drainage and sewage solution, and other pump products.
We have an independent factory and trade office.

Q2: how to deliver the portable diesel water pump
A2: We can offer our equipment by containers or bulk ship.

Q3: How to pay for the portable Diesel water pump?
A3: We can accept T/T, L/C and soon

Q4: why choose borra company?
A4: We have an independent factory and foreign trade office. so we can design high-quality portable generators
and water pumps according to clients requirements and our price is reasonable. 

Contact Us
If you are interested in our products or have any questions about our products, we are very honored to serve you
 

Send your message to this supplier

*From:
*To:
avatar Mr. Borra
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now