Diesel Engine Pump System Jqd

• Customization: Available
• After-sales Service: Worldwide
• Warranty: 1 Year
• Model NO.: JQD
• Air Engine Type: Diesel Engine
• Theory: Gas-hydraulic Hybrid Type
• Transmission: Direct Connection Transmission
• Structure: The Slide
• Diesel Engine Pump System: Diesel Water Pump System
• Transport Package: Wood Case
• Specification: SGS
• Trademark: Borra
• Origin: Wenzhou
• HS Code: 841330900
• Production Capacity: 500

Product Description

Diesel High-Pressure Pump JQD :

The diesel engine fire pump set produced by this company is researched and developed in accordance with the national standard GB6245-2006 "Fire pump performance requirements and test methods" and the American Fire Protection Association standard NEPA20 "Centrifugal fire pump installation" and other standards. At the same time, it is based on market demand and uses When a fire occurs in a building, the power supply system is faulty, and the electric fire pump cannot be put into operation, the diesel emergency fire pump will automatically be put into operation to ensure the normal operation of fire fighting and extinguishing work to ensure the safety of life and property.

Application

This pump is applied in pumping freshwater, seawater, river water, corrosive water, impurity water, dirty water, etc. Such as
     1. Irrigation
     2. Fire fighting
     3. Industry water
     4. Mine water pump
     5. Transport water with salt or any other impurity things
     6. Marine
 
Working Conditions

Rotating speed: 3600r/min, 1800r/min, 2960r/min, 1480r/min
Medium: clean water or other liquids similar to clean water in physical and chemical properties
Medium temperature: -10 ~ 80°C,400°C available under special design
Ambient temperature: Up to 40°C
Range of capacity:1.8~850m3/h
Range of head: up to816m
Stage:1~12 stage
 
Pump Construction

Casing/impeller:cast iron,stainless steel,copper,bronze,
Shaft: carbon steel 45#, stainless steel
Mechnical seal:graphite/silicon carbide/tungsten carbide 
 
Advantages

1. Directly coupled, vibration proof, and low noise.
2. Same diameter of inlet and outlet.
3.C&U bearing, which is the most famous brand in China.
4. Circulating flow cooling ensures the mechanical seal's long life.
5. Small foundation is required that will saving construction investment by 40-60%.
6. Excellent seal that is no leakage

Parameter : 

Flow	up to 720m^3/h
Head	up to 600 m
Speed	up to 3000 RPM
Power	up to 1800 kW
Caliber	up to 300 mm

Start, running and stop 

Start

1. First of all, pour water into pipes, to make the pump and inlet pipe filled with water. The pipes shall be sealed, no air leaked. (no-water inside start is forbidden) 
2. Close globe valve and cock on outlet pipe, to reduce start currency.
3. Rotate the rotor by hand, lubricate the bearing and check the pump impeller, seal the ring, if it cannot rotate, you shall not start.
4. Try to start, motor rotation direction shall be as same as the arrow direction on the pump. 
5. When the rotor works normally, open gradually the outlet globe valve, adjust for the work conditions required.

Running

1. Observe the reading in meters, keep it running around the flow and head shown on the nameplate.
2. Regularly check, motor currency value shall not exceed rated currency value.
3. Pump bearing temperature shall not exceed 75ºC, and shall not be 35ºC higher than ambient environment.
4. To start, loosen the stuff cap. Adjust later when started.
5. In case of fragile component abrasion, replace in time.

6. When any abnormal happens, immediately stop and check.

Stop

1. Close the globe valve on the outlet pipe, close the vacuum gauge cock.
2. Stop the motor, and close the pressure cock.
3. In Winter, drain the liquid in the pump completely to avoid frozen cracks.
4. When you will not use it for a long time, uninstall the pump, clean, and lubricate.


Troubleshooting 
 

Fault	Cause	Solution
The pump cannot suck water, pressure gauge & vacuum gauge vibrating	1. Insufficient water pouring  2. Leak between pipe and meter  3. Suction is too high	1, check a leak in the bottom valve.  2, Tighten the leaked part  3, reduce suction
The pump cannot suck, high vacuum is shown in the vacuum gauge	1, bottom valve closed or jammed  2, Too great water suction resistance  3, filter jammed	1, check bottom valve 2, replace water suction pipe 3, clear off the filter
Pressure gauge works, no water outcome	1. Great outlet water pipe resistance 2. Wrong rotation direction  3. Outlet pipe valve closed 4. impeller jammed	1. check or shorten water pipe  2, check the motor, adjust  3, open the valve and clear off the impeller
Cannot reach designed flow	1. air sucked  2. Water level drops, submerged depth is not enough  3. impeller jammed  4. rotor torn and worn	1, check leak part and clear off  2, prolong water inlet pipe, increase the submerged depth 3, uninstall and clear off  4, replace seal ring
Great pump power consumption	1. Stuff tightened, overheated  2. Great flow  3. Collision between rotor and case  4. Pump shaft bearing abrasion  5. Pump shaft misplaced	1. loosen slightly 2. reduce globe valve opening 3. adjust  4. replace bearing  5. replace or adjust
Great pump vibration	1. impeller partially jammed  2. impeller damaged  3. little flow  4. non-concentric between pump shaft and motor. 5, bearing damaged  6, gas etching	1. Uninstall and clear off  2, replace  3, increase opening  4, adjust 5, replace   6, change suction inlet port

Borra Technology Co., Ltd.

Borra Technology co., Ltd., founded in 1995, owns a top-rank design, production, sales, and service team, and modern production lines, to manufacture various self-priming pumps, movable diesel pumps, diesel Self-Priming dirt drain pumps, diesel fire pumps units, diesel mini-pumps.


Certificate : 

Services:

1. One year or 1000 working hours guarantee of the whole machine except for wear parts;
2. Technical support by email the whole day;
3. Calling service;
4. User's manual available;
5. Installation guide for clients from both China and abroad;
6. Maintenance and replacement service;

FAQ:

Q1: Are you a reliable company?
A1: Bora is located in Wenzu, a beautiful city in Zhejiang Province, China. we have many years of manufacturing experience,
we can supply all types of fire protection solutions, Drainage and sewage solution, and other pump products.
We have an independent factory and trade office.

Q2: how to deliver the portable diesel water pump
A2: We can offer our equipment by containers or bulk ship.

Q3: How to pay for the portable Diesel water pump?
A3: We can accept T/T, L/C and soon

Q4: why choose borra company?
A4: We have an independent factory and foreign trade office. so we can design high-quality portable generators
and water pumps according to clients requirements and our price is reasonable. 

Contact Us
If you are interested in our products or have any questions about our products, we are very honored to serve you.