• 2X Dual-Stage Rotary Series Vacuum Pump
  • 2X Dual-Stage Rotary Series Vacuum Pump
  • 2X Dual-Stage Rotary Series Vacuum Pump
  • 2X Dual-Stage Rotary Series Vacuum Pump
  • 2X Dual-Stage Rotary Series Vacuum Pump
  • 2X Dual-Stage Rotary Series Vacuum Pump

2X Dual-Stage Rotary Series Vacuum Pump

After-sales Service: Worldwide
Warranty: 1 Year
Max.Capacity: >400 L/min
Driving Type: Motor
Impeller Number: Single-Stage Pump
Working Pressure: Middle Pressure Pump
Customization:

Contact Supplier

Gold Member Since 2021

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
2X
Influent Type of Impeller
Single Suction Pump
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Closed
Usage
Pump
Pump
Vacuum Pump
Electric Water Pump
Motor Pump
Vacuum Pump
Dual-Stage Pump
Rotary Pump
Water Pump
Transport Package
Wood Case
Specification
ISO
Trademark
Borra
Origin
Wenzhou
HS Code
8413810090
Production Capacity
1000

Product Description

2X Dual-Stage Rotary Series Vacuum Pump:

2X dual-stage rotary series vacuum pump, is in dual-stage structure, the high-pressure stage and low-pressure stage, and its inlet is connected with the vacuum equipment. The pump technical parameters: 6×10-2pa. As required by users, a vacuum booster pump can be added, and take this pump as the pre-stage pump, to boost the pump draw force, and you will obtain a higher vacuum degree when you use this pump for gas withdrawal. The pump is suitable for metallurgy, chemical, optical power supply vacuum.
2X Dual-Stage Rotary Series Vacuum Pump

Feature :

1- Compact structure
2- 
Easy to work
3- Double-stage direct connection structure
4- Using metal scraper ·
5- Can be matched with precision instruments
Wide range of applications.

 
2X dual-stage rotary series vacuum Pump Condition :

l. 2X dual-stage rotary series vacuum pump is the basic equipment, and it is widely used in electronic elements and appliances manufacture, vacuum drying, filtering, soaking, welding.
2. 2X dual-stage rotary series vacuum pump, work in temperature 5ºC~40ºC.
3. 2X dual-stage rotary series vacuum pump inlet continuous-time shall not exceed 3min.
2X Dual-Stage Rotary Series Vacuum Pump
2X Dual-Stage Rotary Series Vacuum Pump


Instructions :

1. Check the oil level, it is advisable to fill the oil to the center of the oil mark when the pump is stopped. If it is too low, the exhaust valve cannot act as an oil seal and affect the degree of vacuum. If it is too high, it may cause fuel injection when starting to open to the atmosphere. During operation, the oil level has increased, which is a normal phenomenon. Oil production Use the clean vacuum pump oil of the specified brand and add it from the oil filling hole. After refueling, the screw plug should be screwed on. The oil should be filtered to prevent debris from entering and blocking the oil holes.
2. The 2XZ rotary vane vacuum pump can be started at one time under the atmosphere or any vacuum degree. If the pump port is connected with a solenoid valve, it should act at the same time as the pump.
3. When the ambient temperature is too high, the temperature of the oil will rise, the viscosity will drop, and the saturated vapor pressure will increase, which will cause the ultimate vacuum to drop, especially the total pressure measured with a thermocouple. Such as strengthening ventilation and heat dissipation, or improving pump oil performance, the ultimate vacuum can be improved.
4. Check that the ultimate vacuum of the 2XZ rotary vane vacuum pump is based on the compression mercury vacuum gauge. If the gauge is fully pre-pumped, the pump temperature is stable, and the pump port is directly connected to the gauge. It will reach within 30 minutes of operation. Ultimate vacuum. The value measured by the total pressure gauge is related to the error of the pump oil, the vacuum gauge, and the gauge. Sometimes the error can be very large and can only be used as a reference.
5. If the relative humidity is high, or the pumped gas contains more condensable steam, the gas ballast valve should be opened after the pumped container is connected, and the gas ballast valve should be closed after 20-40 minutes of operation. Before stopping the pump, the gas ballast valve can be opened for 30-minute no-load movement to extend the life of the pump oil.
6. Oil selection for 2XZ rotary vane vacuum pump: The viscosity of the pump oil affects the starting power and the ultimate vacuum of the pump. When the viscosity is high, it is beneficial to the vacuum degree, but the starting power is larger. The saturated vapor pressure of the oil at the pump temperature will affect the ultimate total pressure of the pump, the lower the better.


Technical parameters:
 
  2X-2 2X-4A 2X-8A 2X-8 2X-15A 2X-15 2X-30 2X-70
2 4 8 15 30 70
Limit vacuum   Pa(Torr) 6×10-2(≤5×10-4)110
6×10-1(5×10-3) (≤1×10)
Motor power (KW) 0.37 0.55 1.1 1.5 3 5.5
Temperature rise (ºC) ≤40
Inlet diameter (mm) 18 25 40 40 65 80
rotation speed (r/min) 450 590 420      
Oil capacity (L) 0.7 1.0 2.0 2.8 3.0 4.2
noise dB(A) 68 ≤68 ≤70 ≤75 ≤78(~70) ≤80(~75)
Dimensions (cm) 56×31×39 56×34×37 79×43×54 79×53×54 78×50×56 91×65×70
Type DDC-JQ25 DDC-JQ40 DDC-JQ65 DDC-JQ80
Weight (kg) 58 55 80 110 232 330
Cooling mode Natural cooling Water cooling Natural cooling Water cooling
Cooling water (L/min) - >0.5 - >0.8 >1 >2

Borra Technology Co., Ltd.

Borra Technology co., Ltd., founded in 1995, owns a top-rank design, production, sales, and service team, and modern production lines, to manufacture various self-priming pumps, movable diesel pumps, diesel Self-Priming dirt drain pumps, diesel fire pumps units, diesel mini-pumps .

2X Dual-Stage Rotary Series Vacuum Pump
Certificate :
2X Dual-Stage Rotary Series Vacuum Pump

Services:

1. One year or 1000 working hours guarantee of the whole machine except for wear parts;
2. Technical support by email the whole day;
3. Calling service;
4. User's manual available;
5. Installation guide for clients from both China and abroad;
6. Maintenance and replacement service;


FAQ:

Q1: Are you a reliable company?
A1: Bora is located in Wenzu, a beautiful city in Zhejiang Province, China. we have many years of manufacturing experience,
we can supply all types of fire protection solutions, Drainage and sewage solution, and other pump products.
We have an independent factory and trade office.

Q2: how to deliver the portable diesel water pump
A2: We can offer our equipment by containers or bulk ship.

Q3: How to pay for the portable Diesel water pump?
A3: We can accept T/T, L/C and soon

Q4: why choose borra company?
A4: We have an independent factory and foreign trade office. so we can design high-quality portable generators
and water pumps according to clients requirements and our price is reasonable. 

Contact Us
If you are interested in our products or have any questions about our products, we are very honored to serve you.

Send your message to this supplier

*From:
*To:
avatar Mr. Borra
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now